Posted  by 

3Gstick CM Port (COM4) Driver Download For Windows 10

Support > Software & Drivers

Cutting Plotters

3gstick Cm Port (com4) Driver Download For Windows 10 Kms

Drivers, Files & SDK Downloads. Welcome to our download tool. By downloading a driver, you agree to the terms and conditions of the applicable End User License Agreement (EULA) on behalf of yourself and the company you represent. View the applicable EULA by clicking on the EULA link in the Notes. Choose a category to begin.

3gstick Cm Port (com4) Driver Download For Windows 10 64-bit

Software & Drivers

Go to the driver section : Windows driver
Go to the softwares (1) section : Controller, ROBO Master Pro, D-Cut Master
Go to the softwares (2) section : Cutting Master 4, Graphtec Pro Studio, Cutting Master 2, Cutting Master 3, Graphtec Studio
* FC9000, go to the product support page.
* CE7000, go to the product support page.
* CE7000-130AP, go to the product support page.
* CE LITE-50, go to the product support page.
* CE6000 PLUS, go to the product support page.
* FCX2000, go to the product support page.
* FCX4000, go to the product support page.

Drivers

Huawei USB drivers is an important of all Huawei smartphones & tablets you can easily connect your device to a computer or laptop to sharing files & communicate between each other, when you installing Huawei USB drivers you will be able to update your Huawei to latest Android OS, and you can easily browse the file system on your Huawei. CNET Download provides free downloads for Windows, Mac, iOS and Android devices across all categories of software and apps, including security, utilities, games, video and browsers.

Cutting PlottersWindows Driver
Windows
7
(32-bits Edition)
Windows
8.1
(32-bits Edition)
Windows
10
(32-bits Edition)
Windows
7
(64-bits Edition)
Windows
8.1
(64-bits Edition)
Windows
10
(64-bits Edition)
Cprrespon- ding model
CE6000-40
CE6000-60
CE6000-120
CE6000-120AMO
OPS662 (v3.80)OPS662 (v4.00)OPS662 (v3.80)OPS662 (v4.00)CE6000
CE6000-120APOPS628 (v10.20)OPS628 (v10.30)OPS628 (v10.20)OPS628 (v10.30)CE6000
FC8600-60
FC8600-75
FC8600-100
FC8600-130
FC8600-160
OPS662 (v3.80)OPS662 (v4.00)OPS662 (v3.80)OPS662 (v4.00)FC8600
FC2250-60
FC2250-120
FC2250-180
FC2250
FC4500-50
FC4510-60
FC4550-50
FC4500
CE2000-60
CE2000-120
OPS628 (v10.20)N/AOPS628 (v10.20)N/ACE2000
CE2000-120APCE2000
CE3000-40
CE3000-60
CE3000-120
CE3000
CE3000-120APCE3000
CE3000Mk2-60
CE3000Mk2-120
OPS662 (v3.00)N/AOPS662 (v3.00)N/ACE3000Mk2
CE5000-60
CE5000-120
OPS662 (v3.00)OPS662 (v3.00)CE5000
CE5000-120APOPS628 (v10.20)OPS628 (v10.20)CE5000
FC2231-60
FC2231-90
FC2321-EX
FC2232-60
FC2232-90
FC2232-EX
OPS628 (v10.20)N/AOPS628 (v10.20)N/AFC2230
FC2240-60
FC2240-120
FC2240-180
OPS662 (v3.00)N/AOPS662 (v3.00)N/AFC2240
FC3600-120OPS628 (v10.20)N/AOPS628 (v10.20)N/AFC3600
FC4200-50
FC4200-60
FC4210-60
OPS628 (v10.20)N/AOPS628 (v10.20)N/AFC4200
FC5100-75
FC5100-100
FC5100-130
FC5100-150
OPS628 (v10.20)N/AOPS628 (v10.20)N/AFC5100
FC5100A-75
FC5100A-100
FC5100A-130
FC5100A-150
FC5100
FC7000-75
FC7000-100
FC7000-130
FC7000-160
OPS662 (v3.00)N/AOPS662 (v3.00)N/AFC7000
FC7000Mk2-60
FC7000Mk2-75
FC7000Mk2-100
FC7000Mk2-130
FC7000Mk2-160
FC7000
FC8000-60
FC8000-75
FC8000-100
FC8000-130
FC8000-160
OPS662 (v3.00)OPS662 (v3.00)FC8000
FC612-09OPS628 (v10.20)N/AOPS628 (v10.20)N/AFC612

Notes/Explanations:

3Gstick CM Port (COM4) Driver Download For Windows 103Gstick
1.
On driver and software, the file is compressed in the ZIP format. It is required to decompress before use.
2.
On driver and software, the language is in English.
3.
On driver and software, the Macintosh OS is not supported exclude the Cutting Master 2 plug-in software.

3gstick Cm Port (com4) Driver Download For Windows 10 64

Softwares

Cutting PlottersCutting Plotter ControllerROBO Master ProD-Cut Master
Windows
7 / 8.1
(32 & 64-bits Edition)
Windows
10
(32 & 64-bits Edition)
Windows
7
(32 & 64-bits Edition)
Windows
8.1 / 10
(32 & 64-bits Edition)
Windows
7
(32 & 64-bits Edition)
Windows
8.1 / 10
(32 & 64-bits Edition)
CE6000-40
CE6000-60
CE6000-120
CE6000-120AMO
OPS676 (v1.40B)N/AN/A
Firmware version 1.60 is required (CE6000 Firmware v2.61)
Manual for CE6000-40/60/120/120AMO (CE6000-UM-152-01)
CE6000-120APN/AN/AN/A
Firmware version v1.50 is required (CE6000-120AP Firmware v2.00)
User manual for CE6000-120AP (CE6000AP-UM-152-01)
FC8600-60
FC8600-75
FC8600-100
FC8600-130
FC8600-160
OPS675 (v1.50B)N/AN/A
FC2250-60
FC2250-120
FC2250-180
N/AN/AOPS639 (v2.12)N/A
FC4500-50
FC4510-60
FC4550-50
CE2000-60
CE2000-120
N/AN/AN/A
CE2000-120APN/AN/AN/A
CE3000-40
CE3000-60
CE3000-120
N/AN/AN/A
CE3000-120APN/AN/AN/A
CE3000Mk2-60
CE3000Mk2-120
N/AN/AN/A
CE5000-60
CE5000-120
OPS664 (v2.20B)OPS661 (v4.60)N/AN/A
CE5000-120APN/AN/AN/A
FC2231-60
FC2231-90
FC2321-EX
FC2232-60
FC2232-90
FC2232-EX
N/AN/AOPS639 (v2.12)N/A
FC2240-60
FC2240-120
FC2240-180
N/AN/AOPS639 (v2.12)N/A
FC3600-120N/AN/AN/A
FC4200-50
FC4200-60
FC4210-60
N/AN/AOPS639 (v2.12)N/A
FC5100-75
FC5100-100
FC5100-130
FC5100-150
N/AN/AN/A
FC5100A-75
FC5100A-100
FC5100A-130
FC5100A-150
N/AN/AN/A
FC7000-75
FC7000-100
FC7000-130
FC7000-160
OPS664 (v2.20B)N/AN/AN/A
FC7000Mk2-60
FC7000Mk2-75
FC7000Mk2-100
FC7000Mk2-130
FC7000Mk2-160
FC8000-60
FC8000-75
FC8000-100
FC8000-130
FC8000-160
OPS675 (v1.50B)N/AN/A
FC612-09N/AN/AOPS639 (v2.12)N/A

Notes/Explanations:

3gstick cm port (com4) driver download for windows 10 64-bit
1.
On driver and software, the file is compressed in the ZIP format. It is required to decompress before use.
2.
On driver and software, the language is in English.
3.
On driver and software, the Macintosh OS is not supported exclude the Cutting Master 2 plug-in software.
4.
On software, it is run in the WOW64 mode when the 64-bits Windows OS is used.

Softwares

Cutting PlottersCutting Master 4Graphtec Pro Studio
Windows
7 / 8.1 / 10
(32 & 64-bits Edition)
Macintosh
OS10.7 - 10.15
Windows
7 / 8.1 / 10
(32 & 64-bits Edition)
FC8600-60
FC8600-75
FC8600-100
FC8600-130
FC8600-160
Cutting Master 4
for Windows
Cutting Master 4
for Macintosh
Graphtec Pro Studio
for Windows
FC4500-50
FC4510-60
FC4550-50
Cutting Master 4
for Windows
Cutting Master 4
for Macintosh
Graphtec Pro Studio
for Windows
Cutting PlottersCutting Master 2Cutting Master 3Graphtec Studio
Windows
7/ 8.1
(32 & 64-bits Edition)
Windows
10
(32 & 64-bits Edition)
Macintosh
OS10.4 - 10.10
Windows
7/ 8.1/ 10
(32 & 64-bits Edition)
Macintosh
OS10.5 -10.11
macOS 10.12
Windows
7/ 8.1/ 10
(32 & 64-bits Edition)
Macintosh
OS10.6 -10.15
CE6000-40
CE6000-60
CE6000-120
CE6000-120AMO
C-Master2(W) (v2.00)TBDC-Master2(M) (v1.99)Cutting Master 3
for Windows
Cutting Master 3
for Macintosh
Graphtec Studio
for Windows
Graphtec Studio
for Macintosh
CE6000-120APN/AN/AN/A
FC8600-60
FC8600-75
FC8600-100
FC8600-130
FC8600-160
C-Master2(W) (v2.00)TBDC-Master2(M) (v1.99)Cutting Master 3
for Windows
Cutting Master 3
for Macintosh
Graphtec Studio
for Windows
Graphtec Studio
for Macintosh
Firmware version 2.10 or later is required (FC8600 Firmware v3.10)
FC2250-60
FC2250-120
FC2250-180
C-Master2(W) (v2.00)TBDC-Master2(M) (v1.99)Cutting Master 3
for Windows
Cutting Master 3
for Macintosh
Graphtec Studio
for Windows
Graphtec Studio
for Macintosh
Firmware version 3.90 or later is required (FC2250 Firmware v4.50)
FC4500-50
FC4510-60
FC4550-50
C-Master2(W) (v2.00)TBDC-Master2(M) (v1.99)Cutting Master 3
for Windows
Cutting Master 3
for Macintosh
Graphtec Studio
for Windows
Graphtec Studio
for Macintosh
Firmware version 1.92 or later is required (FC4500 Firmware v2.70)
CE2000-60
CE2000-120
N/AN/AN/A
CE2000-120APN/AN/AN/A
CE3000-40
CE3000-60
CE3000-120
N/AN/AN/A
CE3000-120APN/AN/AN/A
CE3000Mk2-60
CE3000Mk2-120
N/AN/AN/A
CE5000-60
CE5000-120
C-Master2(W) (v2.00)TBDC-Master2(M) (v1.99)Cutting Master 3
for Windows
Cutting Master 3
for Macintosh
Graphtec Studio
for Windows>
Graphtec Studio
for Macintosh
When current firmware is previous of version 3.80, version 3.90 is required (CE5000 Firmware v4.00)
When current firmware is version 5.00 or later, version 6.20 is required (CE5000 Firmware v6.40)
CE5000-120APN/AN/AN/A
FC2231-60
FC2231-90
FC2321-EX
FC2232-60
FC2232-90
FC2232-EX
N/AN/AN/A
FC2240-60
FC2240-120
FC2240-180
N/AN/AN/A
FC3600-120N/AN/AN/A
FC4200-50
FC4200-60
FC4210-60
N/AN/AN/A
FC5100-75
FC5100-100
FC5100-130
FC5100-150
N/AN/AN/A
FC5100A-75
FC5100A-100
FC5100A-130
FC5100A-150
N/AN/AN/A
FC8000-60
FC8000-75
FC8000-100
FC8000-130
FC8000-160
C-Master2(W) (v2.00)TBDC-Master2(M) (v1.99)Cutting Master 3
for Windows
Cutting Master 3
for Macintosh
Graphtec Studio
for Windows
Graphtec Studio
for Macintosh
Firmware version 3.10 or later is required (FC8000 Firmware v3.50)
FC612-09N/AN/AN/A

Notes/Explanations:

1.
On driver and software, the file is compressed in the ZIP format. It is required to decompress before use.
2.
On driver and software, the language is in English.
3.
On driver and software, the Macintosh OS is not supported exclude the Cutting Master 2 plug-in software.
4.
On software, it is run in the WOW64 mode when the 64-bits Windows OS is used.
5.
In plug-in software Cutting Master 2 and Cutting Master 3, new version will not be released even if the OS or application software is updated. It is recommended using plug-in software Cutting Master 4 corresponded to new OS or application software if possible.
TS-990S, TS-890S, TS-590SG, TS-590S, TH-D72A/E
KPG-22U, KPG-46U, KPG-186U
Virtual COM Port Driver
Last updated : August 21, 2019
Introduction
Thank you for choosing the KENWOOD transceivers. You can connect your TS-990S, TS-890S, TS-590SG, TS-590S, or TH-D72A/E to a PC via a USB cable, or you can connect your TH-K20A/E, TH-K40A/E, TM-281A/E, TM-481A, or other transceivers to a PC via the KPG-22U/46U/186U programming cables by installing the virtual COM port driver in the PC, and then utilize the Radio Control Program, Memory Control Program, or other software we have provided.
This virtual COM port driver installation program is provided by Silicon Laboratories Inc.
After reading through the following explanations, feel free to download and install the software.
Operating Environment
1.Operating System (OS)
Windows® 7 (32-bit or 64-bit)
Windows® 8.1 (32-bit or 64-bit)
Windows® 10 (32-bit or 64-bit)
2.Peripheral Devices
USB 2.0 interface.
Installing the virtual COM port driver
ATTENTION: Do not connect the device to a PC before installing the virtual COM port driver.
Extract the downloaded file ('CP210x_Windows_Drivers.zip' for Windows® 7/8.1, or 'CP210x_Universal_Windows_Driver.zip' for Windows® 10) into a designated folder.In the designated folder, a folder labeled 'CP210x_Windows_Drivers' or 'CP210x_Universal_Windows_Driver' will be created.
In the created folder, double click the 'Cp210xVCPInstaller_x86.exe' with 32-bit OS, or the 'Cp210xVCPInstaller_x64.exe' with 64-bit OS, and follow the instructions that appear on the display to install the virtual COM port driver.
Connecting the device to a PC
Turn the transceiver power ON, then connect it to a PC via a connection cable for the transceiver. The PC will detect new hardware.
The installation of the device driver software will start automatically.
If a reboot request appears, please reboot the PC.
Confirming the COM port number
Open the 'Device Manager' to confirm which COM port number is assigned for connection with the device.
(Confirm the COM port number after turning on the transceiver and connecting the transceiver to the PC using a USB cable, or after connecting the KPG-22U/46U/186U to the PC.)
For Windows® 7
1. Click the Windows® [Start] button.
2. Right-click [Computer], then click [Properties].
3. Click [Device Manager] in the displayed window.
4. [Device Manager] window will appear.
For Windows® 8.1 and Windows® 10
1. Right-click the Windows® [Start] button.
2. Click [Device Manager] in the displayed window.
3. [Device Manager] window will appear.
Click “Ports (COM & LPT)” to extend it, then you can find “Silicon Labs CP210x USB to UART Bridge (COMxx)”.The “COMxx” number is different depending on your PC.
In the above example, “Silicon Labs CP210x USB to UART Bridge (COM3)” is listed. This means that COM3 is assigned for the connection with the transceiver.
Select this port number in the configurations for communication in the software you are using.
Note:
When connecting a TS-890S transceiver to the PC, 2 virtual COM ports are assigned as follows.
In the TS-890S Menu settings, these 2 virtual COM ports are defined as [Virtual 'Standard' COM Port] and [Virtual 'Enhanced' COM Port].
These 'Standard' and 'Enhanced' virtual COM ports are distinguished as follows.
•Double-click on these in the Device Manager to display the respective Properties windows.
•Select the 'Details' tab and then select 'Location Paths' (or 'Rutas de acceso de ubicación':Español, 'Chemins d'accès des emplacements':Français, 'Speicherortpfade':Deutsch, 'Percorsi':Italiano, 'Locatiepaden':Nederlands) from the Property drop-down menu.
•Move the mouse cursor to the line displayed in the 'Value' column (the top line if multiple lines are displayed) and check the number in the parenthesis on the right end of the character string.
The port displayed with the number (1) is the virtual COM (Standard) port of the transceiver.
In the display example above, the virtual 'Standard' COM port is assigned to COM3.
The port displayed with the number (2) is the virtual COM (Enhanced) port of the transceiver.
In the display example above, the virtual 'Enhanced' COM port is assigned to COM4.
Please also refer to the TS-890S Instruction manual for details.
If you agree with the details listed above, click one of the following links corresponding to each OS to download the virtual COM port driver installation program.
For Windows® 7/8.1:
'CP210x_Windows_Drivers.zip'(v6.7.6) 6.83MB download
For Windows® 10:
'CP210x_Universal_Windows_Driver.zip'(v10.1.8) 878KB download
You can also download the latest and earlier versions virtual COM port driver installation program from the Silicon Laboratories website. (The URL link is subject to change.).
Microsoft®, Windows®, and Windows logo are registered trademarks of Microsoft Corporation in the United States and/or other countries.