Posted  by 

Accept 00000001 Driver Download For Windows


The XPS printer driver (XPSDrv) is an enhanced, GDI-based Version 3 printer driver that was used prior to Windows Vista. XPSDrv printer drivers (like the GDI-based ones) consist of three main components.


To use this site to find and download updates, you need to change your security settings to allow ActiveX controls and active scripting. To get updates but allow your security settings to continue blocking potentially harmful ActiveX controls and scripting from other sites, make this site a trusted website. If you need a driver for the PCI network card, chip RTL8139 or RTL810x, then we advise to download Realtek PCI Fast Ethernet Drivers. Download drivers (Upd: ): Realtek PCIe GBE Family Controller LAN Driver 711 for Windows 7 (10 MB). This download provides the Realtek. High Definition Audio Driver for the 3.5mm audio jack on the IntelĀ® NUC Kits NUC8i7HxKx. This audio driver is required if you plan to connect a microphone or headset to the audio jack or want to use the TOSLINK connection on the back of the Intel NUC.

These are the three main components of XPSDrv printer drivers:

The configuration module of an XPSDrv printer driver provides the same functions as the configuration module of the Printer Interface DLL of a GDI-based driver, but the XPSDrv configuration module also supports the Print Ticket and Print Capabilities technologies.

The render module of an XPSDrv printer driver does not, necessarily, use the GDI-based rendering functions of a GDI-based printer driver. Instead, the render module of an XPSDrv printer driver consists of zero or more filters and a configuration file that describes the actions of each filter. The filters in the rendering module of an XPSDrv printer driver must also support the Print Ticket technology to correctly process the print job for the printer.

For more information about installing XPSDrv drivers, see XPSDrv Installation.

Driver INFO

Accept 00000001 driver download for windows 10
Drivers package details
Latest version:
Release date:
November 11, 2020
Installation guides
Installation Guides:
Drivers tested on
Tested on:
Windows: 10, 8.1
Windows Server: 2019, 2016, 2012 R2

Supported printers

BidirectionalThe printer model supports bidirectional communication. NiceLabel driver can obtain the feedback of the printer status. The status can be reported to and displayed in NiceLabel software.
Accept 00000001 Driver Download for windows

Accept 00000001 Driver Download For Windows

  • Bidirectional QLS Kiaro
  • Bidirectional QLS Kiaro D

Accept 00000001 Driver Download For Windows 10

  • Bidirectional QLS Kiaro 50
  • Bidirectional QLS Kiaro 50 D
  • Bidirectional QLS QL-111

Release notes

Software latest release notes
Release versionRelease description
Ver.: 8.5.0 Communication with the printer is working now also when port monitor logging is enabled on non English Windows OS.
Ver.: 8.3.1
Improved performance
Driver initialisation time was decreased for up to 30%.
Smaller file footprint
Driver file size was reduced for up to 60%.
Improved installation utility
PrnInst better supports multi user environments. Driver upgrade procedure was improved for installations with large number of printers.
Ver.: Driver stability was improved and memory usage was optimized.
Ver.: User can now use Reload to upload entire list of virtual fonts to printer again, instead uploading each virtual font individually.
Ver.: Procedure for updating printers is improved in Prninst application that all settings for all users are correctly preserved.
Ver.: Prninst application automatically detects printer(s) connected to local network.
Ver.: Fixed print spooler crash using latest driver's language monitor.
Ver.: Driver Maintenance, Settings and Support actions are working also with printer name longer than 32 characters.
Initial Version 8 release:
Redesigned and updated User Interface.
Added and improved Print Preview to be shown on more panels.
Added new Tool options for easier Maintenance, Setup and Support.
Added options for sending files or commands to the printer.
Added possibility to toggle Status Checking during printing.
Fixed in-corrections when displaying driver on High-DPI monitors.
Ver.: During printer driver installation and uninstallation the Unicode printer names are fully supported.
Ver.: Improved displaying of Network discovered printers while sorting and graying already installed printers during printer driver installation.
Ver.: Minimized the frequency of displaying the splwow64 thunking spooler (SplWow64) message during printer installation.
Ver.: Upgraded uninstall of Ports and Port Monitors when printer removing the printer driver.
Ver.: During printer driver installation additional fields Location and Comment can be set.
Ver.: Kiaro 50 D can successfully print with NiceLabel driver.
Ver.: Installation of 32bit driver for sharing printer on 64bit OS has failed. This is corrected now.
Ver.: When you select QLS Kiaro printer that is shared in the new label wizard, Nicelabel Designer has crashed. This is fixed now.
Kiaro printers are identified also with new USB plag&play ID's with company name AstroNova.
Ver.: Communication with the printer was improved on USB and LAN port.
Ver.: Magenta+ color option added on supported models.
Ver.: Fixed crash during installation of new Port on Windows Server 2012 and 2012 R2.
Ver.: Fixed printing of garbled graphics on certain label dimension from Windows applications.
Ver.: Added support for new printers: Kiaro! 50.
Added support for Durable series: Kiaro! D, Kiaro! 50D.
Ver.: Added support for Ink Refresh option.
Ver.: Addded support for cutter.
Ver.: Fixed issue when it sometimes failed to print first page when printing to LAN port.
Ver.: When printing large quantities of labels Data error (size) error will no longer happen.
Ver.: Optimize printing performance.
Added new options for Print Quality, Paper Types and Color Profiles.
Ver.: Unprintable area is now correctly displayed on all orientations (rotated portrait or landscape).

Swiftcolor and QLS Kiaro! are presented to NiceLabel as full color drivers which changes color picker for elements from palette to full color.

Ver.: Corrupted driver data does not crash the driver.
Ver.: When printing OpenType fonts from labelling application (version older than 5.4.5), printing fails.
Ver.: Import from DRS (old driver export format) now includes stocks.
Next button is enabled when a printer is selected while selecting printer during printer uninstallation.
Ver.: Fixed problems with default ellipse element in labelling problem. Thickness is now set to 1mm (not 0mm).
Ver.: Translations update
Ver.: Fixed printing of OLE objects
Ver.: After memory card is formatted, 'Test' and 'Delete' buttons are not disabled
Ver.: Uninstall and Uninstall All options in Printer Install Wizard will show only filtered driver list.
Ver.: Import from DRS (old driver export format) now includes Custom commands.
Ver.: Corrected memory allocation, so Windows system will no longer run low on memory resources.
Ver.: Correct graphics instead of black rectangle will now be printed when printing a label with changing graphics on multiple pages.
Ver.: Kiaro printer no longer prints a garbage in case of printing variables from the database. Also fixed elements (rectangles) are not printed on second label if they are not in lebel design.
Ver.: NiceLabel inverse element has been disabled, because the printer does not support it.
Ver.: Labels in landscape or rotated landscape orientation are printed correctly.
&gt&gt See more release notes