Kinco Automation offers cost-effective solutions without sacrificing quality. Our broad product lines include Human Machine Interfaces (HMIs), Programmable Logic Controllers (PLCs), Servo System Components, Variable Frequency Drives (VFDs), Stepper Motors and Drivers, as well as a range of accessories to complete your system. Saa7134 and associated kernel driver modules. TV cards based on the saa713x chips are well supported by the saa7134 driver. The picture quality is typically high, and the sound can be taken directly from the TV card (SAA7131, SAA7133, SAA7134, SAA7135) or through a patch cable to your sound card (SAA7130HL). Re: Current saa7134 driver breaks KNC One Tv-Station DVR (card=24) From: Johannes Stezenbach Date: Thu Dec 30 2004 - 21:10:10 EST Next message: Jesper Juhl: 'Re: patch add loglevel to a few printk's in arch/m32r/kernel/ptrace.c'.
Jan 13, 2021 One tv station dvb s2 twin driver download globetv incl globe globe and data media versions for all tvstation dvb and dvb tv star for. Log in or Sign up to hide all adverts. Firstly, you need to use the second test binary that I posted in order for your tuner to be correctly recognised as a KNC tuner.
- 2How to make it work
- PCI interface
- SAA7134 chipset
- RDS-Tuner Chip SAA6588 chipset
- MPEG-Encoder Chip SAA6752HS
- FM, TV, Composite, S-Video and Audio inputs (outside)
- Two conectors (one is Audio out) (inside)
How to make it work
It was detected automatically as card=24.
The sound doesn't work from internal Mixer (at the moment - should work according to Video4Linux Mailing List).At the moment I use the Audio-out conector inside. If you hold the slot cover at the left and the PCI connector at the lower side, the audio out connector is the lower one. The 4 pins from the white MIDI-connector are from left to right: left-channel / ground / right-channel / ground. This one I connect to an audio input (Aux) of my sound card (SoundBlaster Live! 5.1). If I switch the input to this channel, the sound works fine.
The MPEG-Encoder works, as long as saa7134-empress and saa6752hs kernel modules are loaded. The MPEG TS stream is available at /dev/video1. The default parameters are:
Drivers Knc One Piece
In August 2008 the driver has been fixed to properly use V4L2 MPEG API (extended controls). According to Video4Linux Mailing List using a recent v4l-dvb repository, it's possible to change most of the encoder properties using v4l2-ctl.
There is some information, that mencoder supports V4L2 MPEG API, VLC has some support through pvr access module (i.e. it's possible to set one of the following resolutions: 720x576, 480x576, 352x576, 352x288).
The card runs ok on kernel 220.127.116.11 and up.
The important parts from my message log:
Dmesg of kernel 2.6.13-15.7-default (x86-64):
kRadio (dosn't work in the moment - see above)
Drivers Knc One Rewards
Linux runing Hardware chapter PCI-Karten (German)