Posted  by 

Drivers Microsoft Hard Disk Controller

  1. Drivers Microsoft Hard Disk Controller Of Ssd
  2. Drivers Microsoft Hard Disk Controller Error
Disk

I am trying to install windows server 2016 but it just refuses to find the hard drives. The mass storage in the BIOS is set to AHCI and it is set to use RSTe. I have tried downloading the drivers for the SATA controller (C600/C220 SATA RAID Controller) and when I get to the windows installation screen that cannot find the drivers I do the 'load. If the SATA hard drive is not showing then click the Load Driver option. The 'additional controller driver' is the SATA controller driver. Whether the SATA controller is embedded on the motherboard or is an add-on card, the driver (s) can be found on the CD or website of the manufacturer. The source may be the controller or (more probably) a device (harddisk 2) that is attached to the controller. The hardware problem can be poor cabling, incorrect termination or transfer rate settings, a faulty device, or in rare cases, a poorly written device driver. Hard drive is currently blank/wiped, trying to install clean from Windows 10 Pro installation disc. I had Windows 8 installed on the same hardware up until a few days ago, then i wiped the hard drive to prepare for a clean install of Windows 10. Also tried installing Windows 7 as a test- same results, OS disc won't detect the hard drive.

Printable version

* RECOMMENDED * HPE Smart Array Gen10 Controller Driver for Windows Server 2012 R2 and Windows Server 2016

By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement.
Note: Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.

Type:Driver - Storage Controller
Version:100.52.1.64(5 Feb 2018)
Operating System(s):
Microsoft Windows Server 2012 R2
Microsoft Windows Server 2016
Microsoft Windows 10 (64-bit)
Multi-part download
File name:cp032545.compsig (2.0 KB)
File name:cp032545.exe (826 KB)
This component provides support for the HPE Smart Array Gen10 E-series and P-series controllers

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

    • Enhanced controller cache management when doing an OS shutdown, hibernate, or sleep.
    • Enabled PCI Passthrough on Hyper-V.

To ensure the integrity of your download, HPE recommends verifying your results with the following SHA-256 Checksum values:

8a1745bd7baa6a2be5c1f7463268e55751d82698c6f3ab3c115e8e0223a4f056cp032545.compsig
e5ea03f105086191f448fb3e18460d30b9157929572e3bd0578ff5381265a8c2cp032545.exe

Reboot Requirement:
Reboot is required after installation for updates to take effect and hardware stability to be maintained.

Installation:
Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component Number.

From that drive and directory, execute the downloaded file.

End User License Agreements:
HPE Software License Agreement v1
Hewlett-Packard End User License Agreement

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Version:106.190.4.1062 (21 Dec 2020)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

This release provides the following fixes:

  • Fixed an issue where the early completion of the SRB_FUNCTION_SHUTDOWN SRB is in dump mode

  • The driver was not setting the feature bit to inform the controller to return a unique WWN ID per SATA drive via Inquiry VPD 0x83 rather then returning WWN ID per SAT drive port.

  • While executing HCK CHAOS test, SmartPQI driver crashes with bugcheck 0x7A (KERNEL_DATA_INPAGE_ERROR).

  • While rebooting, the SmartPQI driver crashes with bugcheck 0xD1

  • An issue where Sleep test causes the SmartPQI driver to trigger a bugcheck 0xD1.

  • Fixed an issue while executing driver disable/reinstall, the SmartPQI driver crashes with bugcheck 0xD1

  • Fixed an issue where the application hangs due to lost command. When issuing 'Get-Disk' from Powershell, the command would eventually hang indefinitely.

  • Fixed the registry lookup for determining where I/O is completed was using the string ' SubmitViaStartIo ' instead of ' CompleteIoInDpc '.

  • Fixed an issue where while executing sleep, the windows SmartPQI driver crashes with bugcheck 0x7E.

  • Fixed an issue where the system would BSOD when doing unnecessary initialization of the multi-tag table after declaring controller lockup.

  • Fixed an issue that causes a DRIVER_POWER_STATE_FAILURE BSOD

  • Fixed an issue where assert did not take into account hibernation/sleep mode where the driver limits the max I/O setting.

Added an enhancement to fix the stale Drive fi rm ware version returned by a Power Shell command.


Version:106.178.0.1009 (11 Aug 2020)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Minor fixes required for functionality of FW 3.0

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Smartpqi driver 106.178.0.1009 supports the latest versions of Microsoft Windows OS environments and it is recommended for used with HPE Gen10 Smart Array controllers FW 3.0


Version:106.166.0.1022 (20 Dec 2019)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

  • When executing a “PCS-E2Launch” the system cause stop responding due to the internal controller command accessing the cmdinfo SRB.

Version:106.100.0.1014 (9 Sep 2019)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Fix the following issues:

  • System may become unresposive during initialization of s DC OFF/ON test
  • Corrected a wrong character displayed by Device Manager in a Japanese environment
  • Issue where a PQI reset was sent incorrectly to the controller causing the PNP WHQL test case to fail
  • Data could become inaccesible when a reboot is executed while the controller is in dump mode because the Power SRB completed before the cache flush

Version:106.84.2.64 (2 Apr 2019)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

  • Improved integration with Smart Update Manager

Version:100.62.0.64(A) (27 Nov 2018)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Note: If version 100.62.0.64 was previously installed, then it is not necessary to upgrade to version 100.62.0.64 (A)

Added support for Windows Server 2019.


Version:100.62.0.64 (26 Jun 2018)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

  • Windows 2016 fails cluster validation test.
  • Windows “Removal Policy” incorrectly set to TRUE.

Version:100.52.1.64 (5 Feb 2018)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

    • Enhanced controller cache management when doing an OS shutdown, hibernate, or sleep.
    • Enabled PCI Passthrough on Hyper-V.

Version:63.32.0.64(B) (20 Dec 2017)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Initial driver release for HPE P/E-Class SR Gen10 controllers.

  • Added support for Windows 10 operating system.

Version:63.32.0.64(A) (25 Sep 2017)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Added support for the following Gen10 servers:

  • HPE ProLiant XL190r Gen10 Server
  • HPE ProLiant XL170r Gen10 Server
  • HPE ProLiant DL180 Gen10 Server
  • HPE ProLiant DL160 Gen10 Server
  • HPE ProLiant DL580 Gen10 Server
  • HPE ProLiant ML110 Gen10 Server
  • HPE ProLiant ML350 Gen10 Server
  • HPE ProLiant XL450 Gen10 Server
  • HPE ProLiant DL120 Gen10 Server

Version:63.32.0.64 (12 Jul 2017)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

  • Initial driver release for HPE P/E-Class SR Gen10 controllers.

Type:Driver - Storage Controller
Version:100.52.1.64(5 Feb 2018)
Operating System(s):
Microsoft Windows 10 (64-bit)
Microsoft Windows Server 2012 R2
Microsoft Windows Server 2016

Description

This component provides support for the HPE Smart Array Gen10 E-series and P-series controllers

Enhancements

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

    • Enhanced controller cache management when doing an OS shutdown, hibernate, or sleep.
    • Enabled PCI Passthrough on Hyper-V.

Installation Instructions

To ensure the integrity of your download, HPE recommends verifying your results with the following SHA-256 Checksum values:

8a1745bd7baa6a2be5c1f7463268e55751d82698c6f3ab3c115e8e0223a4f056cp032545.compsig
e5ea03f105086191f448fb3e18460d30b9157929572e3bd0578ff5381265a8c2cp032545.exe

Reboot Requirement:
Reboot is required after installation for updates to take effect and hardware stability to be maintained.

Installation:
Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component Number.

From that drive and directory, execute the downloaded file.

Release Notes

End User License Agreements:
HPE Software License Agreement v1
Hewlett-Packard End User License Agreement

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Revision History

Version:106.190.4.1062 (21 Dec 2020)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

This release provides the following fixes:

  • Fixed an issue where the early completion of the SRB_FUNCTION_SHUTDOWN SRB is in dump mode

  • The driver was not setting the feature bit to inform the controller to return a unique WWN ID per SATA drive via Inquiry VPD 0x83 rather then returning WWN ID per SAT drive port.

  • While executing HCK CHAOS test, SmartPQI driver crashes with bugcheck 0x7A (KERNEL_DATA_INPAGE_ERROR).

  • While rebooting, the SmartPQI driver crashes with bugcheck 0xD1

  • An issue where Sleep test causes the SmartPQI driver to trigger a bugcheck 0xD1.

  • Fixed an issue while executing driver disable/reinstall, the SmartPQI driver crashes with bugcheck 0xD1

  • Fixed an issue where the application hangs due to lost command. When issuing 'Get-Disk' from Powershell, the command would eventually hang indefinitely.

  • Fixed the registry lookup for determining where I/O is completed was using the string ' SubmitViaStartIo ' instead of ' CompleteIoInDpc '.

  • Fixed an issue where while executing sleep, the windows SmartPQI driver crashes with bugcheck 0x7E.

  • Fixed an issue where the system would BSOD when doing unnecessary initialization of the multi-tag table after declaring controller lockup.

  • Fixed an issue that causes a DRIVER_POWER_STATE_FAILURE BSOD

  • Fixed an issue where assert did not take into account hibernation/sleep mode where the driver limits the max I/O setting.

Added an enhancement to fix the stale Drive fi rm ware version returned by a Power Shell command.


Version:106.178.0.1009 (11 Aug 2020)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Minor fixes required for functionality of FW 3.0

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Smartpqi driver 106.178.0.1009 supports the latest versions of Microsoft Windows OS environments and it is recommended for used with HPE Gen10 Smart Array controllers FW 3.0


Version:106.166.0.1022 (20 Dec 2019)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

  • When executing a “PCS-E2Launch” the system cause stop responding due to the internal controller command accessing the cmdinfo SRB.

Version:106.100.0.1014 (9 Sep 2019)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Fix the following issues:

  • System may become unresposive during initialization of s DC OFF/ON test
  • Corrected a wrong character displayed by Device Manager in a Japanese environment
  • Issue where a PQI reset was sent incorrectly to the controller causing the PNP WHQL test case to fail
  • Data could become inaccesible when a reboot is executed while the controller is in dump mode because the Power SRB completed before the cache flush

Version:106.84.2.64 (2 Apr 2019)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

  • Improved integration with Smart Update Manager

Version:100.62.0.64(A) (27 Nov 2018)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Note: If version 100.62.0.64 was previously installed, then it is not necessary to upgrade to version 100.62.0.64 (A)

Added support for Windows Server 2019.


Version:100.62.0.64 (26 Jun 2018)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

  • Windows 2016 fails cluster validation test.
  • Windows “Removal Policy” incorrectly set to TRUE.

Version:100.52.1.64 (5 Feb 2018)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

    • Enhanced controller cache management when doing an OS shutdown, hibernate, or sleep.
    • Enabled PCI Passthrough on Hyper-V.

Version:63.32.0.64(B) (20 Dec 2017)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Initial driver release for HPE P/E-Class SR Gen10 controllers.

  • Added support for Windows 10 operating system.

Version:63.32.0.64(A) (25 Sep 2017)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Added support for the following Gen10 servers:

  • HPE ProLiant XL190r Gen10 Server
  • HPE ProLiant XL170r Gen10 Server
  • HPE ProLiant DL180 Gen10 Server
  • HPE ProLiant DL160 Gen10 Server
  • HPE ProLiant DL580 Gen10 Server
  • HPE ProLiant ML110 Gen10 Server
  • HPE ProLiant ML350 Gen10 Server
  • HPE ProLiant XL450 Gen10 Server
  • HPE ProLiant DL120 Gen10 Server

Version:63.32.0.64 (12 Jul 2017)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

  • Initial driver release for HPE P/E-Class SR Gen10 controllers.

Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.

Have you found the proper support for this server ?
It's certainly not on the Lenovo web site.

Support for IBM System x
http://www-947.ibm.com/systems/supp...

Drivers microsoft hard disk controller error

Product family - xseries 235
Type - 8671
Model - KAX
Operating System - Windows Server 2003, or Windows Server 2003 Datacenter Edition, or Windows Server 2003 x64, or Windows Server 2003 Datacenter Edition x64, whichever applies
Click on Go

Software and device drivers on the resulting page - more support info including Documentation (manuals) on the right.
........

Apparently this server's mboard has SCSI drive controllers , so I assume the 73gb drives are SCSI drives.

E.g. this may not be model KAX but a lot of other things are probably the same :

IBM eserver xSeries 235 8671 - Xeon 3.06 GHz
Mfg. Part: 8671MAX CDW Part: 609946 UNSPSC: 43211501
IBM
http://www.cdw.ca/shop/products/def...
Product Line: IBM eserver xSeries 235
.....

Drivers Microsoft Hard Disk Controller Of Ssd

Drivers Microsoft Hard Disk Controller

'I purchased a 6I+ raid controller'

IBM ServeRAID 6i - storage controller (RAID) - Ultra320 SCSI - PCI-X
http://www.cdw.ca/shop/products/def...

Description:
The ServeRAID-6i controller is a PCI-X controller that works directly with the onboard LSI 1030 SCSI chipset to provide RAID protected data storage to selected xSeries servers. It supports both Ultra320 and Ultra160 SCSI HD technologies

Link to the Lenovo supplied drivers for the ServeRAID-6i controller here:
http://download.cnet.com/1770-20_4-...
.........

You must make your RAID array BEFORE you install the operating system.
......

Drivers Microsoft Hard Disk Controller

The drivers for the onboard LSI 1030 SCSI chipset may or may not be built into the operating system.

Server 2003 isn't much newer that XP (circa 2001) , and in XP, you may need to supply drivers for a SCSI controller while loading the initial files from the CD. If the Server 2003 CD doesn't find your SCSI drive controllers by default, then Setup can't find your SCSI drives.

For Win 2000 and XP, you see a line very early in the loading of the files from the CD - 'Press F6 to load...' - you press F6 while that's still on the screen.
If the SCSI drivers are available from the CD but are not normally loaded, then you get no further messages, and Setup sees the SCSI hard drives.
If the CD does NOT have the right SCSI drivers available, later on, during loading the initial files from the CD, you will be asked to provide the drivers, and after that Setup will see the SATA drives fine.

For 2000 and XP, you MUST provide the drivers for the drive controller on a floppy in a legacy floppy drive. The CD cannot, at that early stage, find drivers on floppies in most USB floppy drives, on optical disks, on USB drives or any sort, or hard drives, other than where an existing Windows installation is.

You may also need to provide drivers for the 6I+ raid controller add on the same way, but if you don't connect it. I would think you should be able to get by with the onboard SCSI controller drivers provided to the operating system.

Drivers Microsoft Hard Disk Controller Error