Posted  by 

Penmount Touch Driver Download

Note: The RealSimGear GTN750 requires you purchase separately the Reality-XP GTN750 software. The RSG750 will not function without the RXP GTN750 software.

Package Inclusions

  • GTN750
  • Power Pack
  • USB cable
  • HDMI 90 degree adapter

Tech support scams are an industry-wide issue where scammers trick you into paying for unnecessary technical support services. You can help protect yourself from scammers by verifying that the contact is a Microsoft Agent or Microsoft Employee and that the phone number is an official Microsoft global customer service number. 1 Download OS Drivers + manual.zip file for Windows 7 / 8 / 8.1 / 10 / Vista / XP, save and unpack it if needed. 2 Switch on your new hidclass hardware. 3 Right click on the My computer icon and push Properties tab then. Choose Hardware tab. Click on Device Manager button.

Download and install the RealSimGear plugin for your flight simulation software.

  • X-Plane 11 - Windows Installer
  • Prepar3D/FSX - Windows Installer

Connect the cables

Connect an HDMI cable (supplied by customer), and the 2 USB cables between the GTN750 unit and your PC (any USB is fine) along with the 12vDC power supply. Turn on your PC and the display will show a second windows or mac desktop. The image displayed on the GTN750 will be inverted, to correct this you will need to adjust the display settings.

Touch Screen Driver Setup

Download the PenMount touch screen driver software here and install. When asked, select the default option to use mouse pointer mode. Note you will need to restart your PC after the installation is complete.

Configure the display

Connect the USB cables, HDMI cable and power cables to the GTN750. Go into the Windows display settings and make sure the GTN750 display is set to 'Portrait (Flipped)' mode and that the multiple displays are configured to 'Extend these displays'. The GTN750 screen should now show the Windows desktop background.

Download

Once the PenMount driver is installed, open the 'PenNMount Control Panel' application.

The first step is tell your PC which monitor is associated with the touch screen. Click on the 'Multiple Monitors' tab and then click the 'Map Touch Screens' button.

Follow the on screen instructions. Each of your connected screens will turn blue, press the 'S' key on your keyboard to skip, when the blue screen is displayed on the GTN750 screen, touch the screen to complete the process.

Complete the calibration process, click on the 'Device' tab, then click the 'Configure' button.

Click the 'Standard Calibration' button then follow the on screen instructions.

Touch and hold each corner where indicated.

When complete, click 'OK' and then 'OK' again to save the calibration and close the control panel application.

Download and install the RealSimGear plugin for your flight simulation software.

If you have not done so already, download and install the Reality-XP GTN750 for your flight sim. Configure Reality-XP to work with the RealSimGear GTN750 using the steps below.

Penmount Touch Driver Download Pc

Hide the bezel graphic

*Note if you used the new X-Plane installer, you do not need to perform the following bezel process.

Follow the instructions in the Reality-XP user guide for hiding the bezel. Essentially, you just need to go into the aircraft folder and edit the 'RealityXP.GTN' file and change the 'nobezel = false' to 'nobezel = true'

Enable the option to use simulator GPS commands

Go into the settings for the Reality-XP gauge, and under advanced, select the option to ‘Use simulator GPS commands’

Download

Note: For P3D the Reality-XP settings section is access by holding down the SHIFT key and right clicking the top of the GTN750 screen area.

Your RealSimGear GTN750 should now be ready to use. By default it will appear as NAV/COM 1 and you will see it in the connected devices window. When you turn the knobs or press a button the ‘message’ and ‘command’ section will change accordingly.

NOTE: If the GTN750 buttons and knobs are not working, please check to make sure you have selected the correct GTN device to setup and that this matches the device type setting in the RealSimGear plugin menu.

Penmount Touch Driver Download Win 7

  • GTN 1 = Device Type COM1
  • GTN 2 = Device Type COM2

Move the GTN750 window to the RealSimGear GTN750 display, note you will need to ‘pop out’ the window first, this can be done using the Reality-XP plugin menu.

PenMount – Shareware –

Overview

PenMount Windows Universal Driver(WHQL) is a Shareware software in the category Miscellaneous developed by PenMount.

The latest version of PenMount Windows Universal Driver(WHQL) is currently unknown. It was initially added to our database on 07/10/2013.

Penmount Touch Screen Driver

PenMount Windows Universal Driver(WHQL) runs on the following operating systems: Windows.

PenMount Windows Universal Driver(WHQL) has not been rated by our users yet.

Write a review for PenMount Windows Universal Driver(WHQL)!

02/15/2021 EssentialPIM Free 9.7
02/15/2021 TeXstudio 3.0.5
02/15/2021 Sandboxie Plus 0.7.0
02/15/2021 Howard E-Mail Notifier 1.82
02/15/2021 DesktopOK 8.55
Penmount Touch Driver Download
02/10/2021 Adobe updates available
02/10/2021 Firefox 85.0.2 update fixes startup problem
02/09/2021 Microsoft Patchday February 2021
02/09/2021 Updates for Chromium-based browsers now available
02/08/2021 Find the best browser extensions to protect your privacy
  • » penmount whql
  • » universal penmount
  • » penmount driver
  • » penmount universal driver chonikuj
  • » penmount universal driver
  • » penmount dreiver
  • » penmount windows universal driver
  • » cai penmount
  • » pen mount windows universal driver
  • » pen mount universal driver