Posted  by 

Pi Engineering Driver Download

RailDriver Installation Software

Always check the current compatibility chart on the main Support page before installing any software.

Please do not install the version of MacroWorks 3.1 intended for Train Simulator 2017 unless you are using that simulator. For non-TS2014 use, please see Additional Software and Tools below.

By downloading any of the software listed below, you agree to our Terms & Conditions.

  • Download Raspberry Pi Imager for your operating system from the list near the top of this page. Click “CHOOSE OS” and select “Misc utility images” then “Pi 4 EEPROM boot recovery”. Insert an SD card, click “CHOOSE SD CARD”, select the card you have inserted, then click “WRITE”.
  • A Division of P.I. Engineering 101 Innovation Parkway Williamston, MI 48895 Toll-Free: (800) 628-3185 Phone: (517) 655-5523 Fax: (517) 655-4926 raildriver.com [email protected] Visit our Parent Company: piengineering.com.
  • This method only applies to the Raspberry Pi series of display screens, other display screens do not apply. Method 1, If the driver is not installed, execute the following command (Raspberry Pi needs to connected to the Internet).

Downloads Below is where you can find the latest releases of all the Selenium components. You can also find a list of previous releases, source code, and additional information for Maven users. CI543 NANO Intel AHCI/ RAID driver (Win 8.1, Win 10 32/64bits) 15.0.0.1031. OS: Windows 10 32-bit, Windows 10 64-bit, Windows 8 32-bit, Windows 8 64-bit.

DescriptionDownloadInfo/Help
RD for Train Simulator 20174.13MB exeSupport
RD for Microsoft Train Simulator4.4MB exeSupport
RD for Open Railsnative*Support
RD for Rail Simulator6.8MB execontact us
RD for Run8native*Support
RD for TrainMaster 4.34.3MB exeSupport
RD for Trainz 12 SP11.5MB exeSupport
RD for Trainz 123.5MB exeSupport
RD for Trainz 20103.5MB exeSupport
RD for Trainz 20093.5MB exeSupport
RD for Trainz 20063.5MB exeSupport
RD for Trainz 20043.4MB execontact us
RD for Trainz Classics3.6MB execontact us
RD for Trainz UTC (w/o SP1)34.4MB execontact us
RD for Trainz UTC (w/ SP1)4.4MB execontact us
RD for World of Subways 2native*contact us
RD for World of Subways 3native*contact us

* Native support means that the simulator has implemented the RailDriver itself, and additional software to bridge the gap is unnecessary.

Additional Software and Tools

DescriptionDownload
MacroWorks 3.1 (for non-TS2016 use)*@P.I. (external)
P.I. Engineering Windows Software Development Kit@P.I. (external)
RailDriver Modeler's Toolkit for MSTS50KB zip

* The version of MacroWorks 3.1 featured on the RailWorks/Train Simulator 2016 page will not work with any other simulator. Please download the version above, from the P.I. Engineering site, if intending to program the buttons for other use.

More downloads can be found on our Resources page, including MSTS and Trainz 2004 content, as well as legends for labeling your RailDriver.

Motor Control is one of the fundamentals of robotics. In many projects, you would have to either control motor speed or its direction with a particular form of circuitry. Two approaches can be followed, either you can make your motor controller (an H-Bridge) or buy an off-the-shelf solution. Buying an IC or a module that takes care of the motor control removes a lot of physical hassle and, therefore, we have covered some of the best motor drivers you can purchase right now online. For people interested in a motor drivers for Raspberry Pi board, these are the 10 best Motor Drivers For Raspberry Pi available in the market right now.

ULN2003 Motor Driver by Beautiful Store Shop (10.99$)

This board allows you to control servo, DC and stepper motors. The simple circuit board connects quickly to a Raspberry Pi, but it is not that durable.

Pi Engineering Driver Download Free

Available Here

Makerfire® Raspberry Pi L298N Motor Driver Board (132$)

The motor driver utilizes STL298N ZIP chip and works on 5V. You can drive a maximum of a 12V motor with this, and it is fitted with 3.5mm terminals for easy connectivity.

Available Here

Raspberry Pi Motor Driver Board V1.0 (72.97$)

The operating voltage for the motor connected to this module is between 6V~28V DC. The maximum amount of current that a motor can draw from this module is 2A. It also has current limit threshold detection.

Available Here

IRF520 Button MOSFET Driver Module (5.98$)

MOSFET modules are much quicker than simple TTL logic as they have much higher switching frequency. The module works at 3.3V. Hence, it is low power as compared to some.

Available Here

Adafruit DC & Stepper Motor HAT for Raspberry Pi (27.49$)

The module has four bridges of maximum 1.2A per bridge. You can run 4 DC motors on 4.5VDC to 13.5VDC with this module, and it works with Raspberry Pi Model A+, B+, or Pi 2.

Available Here

Raspberry Pi Motor Controller Pi-Plate (33.99$)

Like some of the best modules, this one also allows you to control 4 DC motors or 2 stepper motors at once. You can use a 16Bit accuracy to control the speed of the motor while the complete board weighs only 3 ounces.

Available Here

CJRSLRB® L298N Motor Drive Controller (6.99$)

This module uses 78M05 IC and works between 5V to 12V power supply. The device uses a large filter capacitor and has diodes to protect any damage from reverse current. The device is immune to over heating even though it can work at a maximum of 25W.

Pi Engineering Driver Download Windows 7

Available Here

SMAKN® 16 Channel PWM/Servo Driver IIC interface-PCA9685 (13.60$)

PCA 9685 chip conserves power yet provides good switch speed. In groups of 4, you can connect up to 16 servos at once making this one of the most versatile boards on our list.

Available Here

L298N Dual H Bridge DC Stepper Motor Drive Controller Board (9.50$)

The bridge can sustain a combined power of over 70W and what’s remarkable about this bridge is that it can drive motors on as high as 35V with a maximum of 2A current.

Pi Engineering Driver Download Windows 10

Available Here

Pi engineering driver download free

DROK® L298N Motor Drive Controller Board (6.99$)

Drok board is the most popular of all the motor driver boards. The product has over 102 customer reviews and an average consumer rating of 4.5/5 stars. The board requires 5V logic while it can run up to 15V drive voltage. The board is fitted with all the protective circuitry such as afterflow diodes and a large capacity filter capacitance.

Pi Engineering Driver Download

Available Here

Pi Engineering Driver Download 64-bit

Related posts: