Posted  by 

Tv Card Wdm Video Capture Sound Cards & Media Devices Driver

Note:
The operation of WinTV under Windows requires two pieces: a Windows driver and a WinTV application. The driver is found under the section 'Latest Windows driver' while the WinTV application is available below in 'Latest WinTV Application' section. You cannot run the application without loading the driver.

I am a do-it-yourselfer, but new to computers. I recently installed sound, video and TV tuner cards. The video card is an AOPEN GeForce 6200TC PCI Express 16. This is a learn as you go process for me. ASUS WDM TV Tuner is a compliant of all PCI standards. Aside from recording, the card can also record analog devices, S-Video and other devices that have RF-modulated videos or tuners. One of its unique traits is its ability to capture noise through a stereo mix. This is even though the video input is already set to zero. Best Internal HD Video Capture Cards and TV Tuners Cards for PC. Using these you can record TV, Movies, PC and Console Gameplay from HDMI and Analog sources. Video Capture Card is a device that captures video played on your computer from TV, gaming consoles, movies or any other input. A popular type of Video Capture Card is a TV Tuner Card which is generally used to view and record movies.

You can find accessory applications such as the remote control or scheduler under the Accessories tab above.

Application and drivers for WindowsXP/Me/98/2000/NT/95

Note: if you have an 881 based WinTV PCI board, please go to our pages for 881 based WinTV's

The operation of WinTV under Windows requires two pieces: a WinTV driver and a WinTV application (the WinTV application is available below in 'Latest WinTV Application' section). You cannot run the application without loading the driver.

Tv Card Wdm Video Capture Sound Cards & Media Devices Driver

WinTV WDM driver for 878 based boards

WDM driver for use under WindowsXP, Windows98SE, WindowsMe and Windows2000.
Note: Use the latest WinTV2000 application with this driver
Note: This driver will work with all WinTV PCI boards, except for the WinTV-D, WinTV-HD and WinTV-PVR.
To install, download to a temporary directory and run WDM3.49. Halfway through the installation you will be asked to reboot. Do so to complete the installation.

Name: WHQL_349_24025.exe
Version: 3.49
Size: 1.3Mbytes
Updated: January 2,5 2006

Note: the operation of WinTV under Windows requires two pieces: a WinTV driver (the WinTV driver is available above in 'Driver' section) and a WinTV application. You cannot run the application without loading the driver.

WinTV2000 application

To install, copy this file to a temporary directory on your local disk. Then run wintv2k_412_24054.exe, which will install the new WinTV2000 application.
For support of the new Hauppauge remote control and the Hauppauge IR RemoteBlaster, use the latest IR Remote Control and IRBlaster Setup program. (found in the Accessories section of this page).

Name: wintv2k412_24054.exe
Size: 2.5 Mb
Updated: Jan. 11, 2006

WinTV Radio application for use with WinTV version 6

Notes:

  • this application runs with WinTV version 6 on WinTV boards equipped with FM radio
  • WinTV v7 has a built-in FM radio application

To install, download to a temporary directory and run RADIO32.EXE
New features include 30 presets and local/distance reception. Also, name radio stations by creating a preset and then clicking on the freq display and typing in the string you want.
Click here to see instructions on using the new WinTV Radio32 application.

Name: radio32_154_26154.exe
Version: 1.54
Size: 340 KB
Updated: June 3, 2008

IR Remote control application

Remote control applet. After you run this applet, an icon will appear in your Windows device tray showing that the Hauppauge remote control is active.

Name: 2.71.33113_IR32.exe
Size: 450KB
Updated: April /2015

IR Blaster setup program

Not available at this time

Tv Card Wdm Video Capture Sound Cards & Media Devices Drivers

WinTV-Scheduler update

None at this time

Linux drivers, applications and LinuxTV

The Linux driver for the WinTV card is now part of the Linux kernel (version 2.2 and newer).
The LinuxTV web site is at www.linuxtv.org/
To see some notes from a Linux user on his WinTV installation, click here.

FreeBSD / NetBSD / OpenBSD / BSDi Driver and Applications

The driver for the WinTV card is part of the FreeBSD kernel. It has also been ported to OpenBSD, NetBSD and BSDi operating systems.
The FreeBSD Ports Collection also includes the following programs for the WinTV which can also be installed as binary packages with the sysinstall program.

  • FXTV A TV Tuner and video capture program
  • xmradio A Radio tuner for cards with FM Radio
  • VideoteXt Martin Buck's VideoteXt Teletext program
  • AleVT Edgar Toernig's Teletext program

BeOS support for the WinTV

BeOS now ships with production-quality Hauppauge WinTV drivers.

WinTV QuickInstall Guide for 878 based WinTV boards


IR RemoteBlaster QuickInstall Guide

WinTV Manual

What operating systems can the WinTV PCI card be installed under?

The WinTV PCI boards will function on Windows95, Windows98, Windows ME, WindowsNT 4.0 (service pack 3 or higher), Windows 2000, and Windows XP systems.

3rd party Developers have also written WinTV-pci drivers for both LINUX, and the BeOS. These drivers, information, and their support may be found on their respective websites.

System Requirements

A Pentium 90Mhz or faster is recommended, as well as a motherboard with an INTEL PCI controller chipset for optimum performance. Also, a VGA card that fully supports all aspects of Direct Draw would be required.

Connecting a SATELLITE / DSS / CABLE BOX to WinTV

You must set the WinTV to the recommended channel (usually channel 3) and then control channels with the Satellite receiver / Cable Box. If your satellite receiver / Cable Box has a composite output, it is recommended to connect it to the WinTV's Composite input instead. The clarity of the picture will be better this way. WinTV would then be set to the composite source, Either way, the Satellite receiver / Cable Box will still control the channels.
Cards

There is no Audio from the WinTV

First, be sure that the supplied audio cable is connected from the WinTV card to the Sound Cards LINE-IN.

NOTE: On systems that do not have an actual 'line in', substitute 'Auxiliary'(AUX), or 'Microphone'(Mic) for the configuration procedures below.

In the WinTV 2000 Application, click the AUD button for the audio configuration dialogue (or configure/audio in WinTV32), be sure that the MIXER-ID list shows 'Line-in', and that the volume is up.

Also, in the sound card volume configuration (under PROGRAMS- ACCESSORIES-ENTERTAINMENT-VOLUME CONTROL), be sure that the LINE-IN section is not on MUTE (as it commonly is on default) and that the volume is up.

If all of this is done, and there is still no AUDIO from the WIN/TV card, try connecting your PC speakers(powered speakers only) or a set of headphones directly to the WIN/TV board. You should get audio (although low) this way. If you do- there would be a problem with the sound card configuration or a hardware problem with the LINE-IN. If you do not get audio directly from the WinTV card, it would unfortunately indicate a faulty audio circuit on the WinTV, and therefore would require the board to be replaced.

Causes for System Lockups

If the WinTV application or system is locking up when running WinTV, it may be related to the PCI chipset of the motherboard or the graphics chipset in the system. Setting the Primary application (start/programs/Hauppauge WinTV/Primary) to “DIB DRAW” mode will most likely eliminate this issue. If the problem persists, it may be also related to a resource allocation problem, so moving the WinTV card to a different PCI slot(s) in the system is recommended.

Black Screen in WinTV

If you experience a black screen, but hear audio when running the WinTV software, try setting the Primary application (start/programs/Hauppauge WinTV/Primary) to “DIB DRAW” mode, and re-open WinTV to correct the problem.

If the problem continues, updating the VGA drivers for the graphics chipset in the system is recommended.

'Data invalid' error when trying to install drivers

If you are receiving this error under WindowsXP, please refer to this document: Data invalid WinXP

If you are receiving this error under Windows2000, please refer to this document: Data invalid Win2000

Setting up channels for Broadcast TV and External inputs

To Scan for TV channels in the Channel Configuration, Click on Autoscan. This will open up another dialog box called Tuner Scanning Setup. Set the Tuning mode to Channels by Country, select the Broadcast / Cable setting that fits your input. Make sure that the Video Format is set to NTSC M and then make sure that the country is set to USA. then click on Start to begin the scan.

To Add a Composite channel / External input in the Channel Configuration, click on...

Add - Composite and choose a Channel Number, Channel Name and make sure that the Video Format is set correctly. NTSC for USA). Then click on add. Highlight the channel and click on OK to close the window. You should then be able to see that channel and your RCA input.

I want to save my channel library when I reinstall the software

To save your channel library, go to START / RUN, type REGEDIT at the command line and click OK. This will open your REGISTRY EDITOR. Here, you will want to double-click HKEY _LOCAL_MACHINE, then SOFTWARE, then HAUPPAUGE, and finally, highlight CHANNELS by single-clicking on it. With the CHANNELS folder high-lit, go to the REGISTRY menu and select EXPORT REGISTRY FILE... Name the file something you will remember and save it to a floppy for safe keeping. When you need to reload your channels, just open the REGISTRY EDITOR and select the REGISTRY MENU, then IMPORT REGISTRY FILE... Then just select the file you've saved and click OPEN. You will receive a message stating that the entry has been successfully added. Your channels should now be loaded back into your WinTV programs.

Enabling Closed Captioning using the WinTV2000 application

NOTE: Your VGA card MUST support OVERLAY in order to get the Closed Captioning information.

Make sure that the WinTV is running in Overlay mode before using the Closed Captions. To do this, shut the WinTV off. Then open the Primary program by going to Start - Programs - Hauppauge WinTV - Primary. In here make sure the 'Allow Overlay' option has been selected. Then close the applet.

In the WinTV2000 application you can access the Closed Captioning through the CC button on the main TV window or in the Remote Applet that is part of the WinTV program. Click on the RC button on the bottom right-hand side of the WinTV window. This will open the Remote Applet and then you can click on the CC button for the Closed captioning.

The Audio is not recorded when I capture video

It is actually the Sound Card that will capture the Audio portion when using WinTV.
If you do not record the Audio when you are capturing Video Clips, you want to make sure that the sound card's Line In mixer is setup to Record audio. Sometimes they are set for Playback only. To Check this, click on Start - Accessories - Entertainment (or Multimedia), in the Windows Volume Control, go to Options then Properties. In here click on the Recording Bullet. Below you should see the Mixers that are set to record make sure that the Line In is checked and click on OK. Then make sure that it is not muted. Try to record some audio through the Line In jack using Windows' Sound Recorder. This program is found in the Multimedia group.
If you can record audio using the Sound Recorder, then you should be able to capture audio with the capture program.

Garbled video image when recording

Setting the Primary application (start/programs/Hauppauge WinTV/Primary) to “DIB DRAW” mode should address this issue.

“Failed to Create TV Window” error when attempting to run WinTV2000

This error will typically indicate that there was a problem during the driver or software installation. It would be recommended to clear out the WinTV files from the system, and reinstall using the latest updates.

Uninstalling WinTV Software

The program HCWCLEAR.EXE can be used to remove all of the WinTV drivers, software and registry entries.

HCWClear: remove the Hauppauge driver and applications from your PC

HCWCLEAR.exe is a program you run to remove all driver and files that were installed with the installation of the WinTV program.

Prodinfo: get information on your Hauppauge TV tuner

Prodinfo.exe is a program you can run which will extract information about the WinTV product you have installed such as model and serial number, MAC address, revision, and features which can be used to identify the exact model of your product. The driver for the device must be installed in order to run Prodinfo.exe

(*This post may contain affiliate links, which means I may receive a small commission if you choose to purchase through links I provide (at no extra cost to you). Thank you for supporting the work I put into this site!)

Video Capture Card is a device that captures video played on your computer from TV, gaming consoles, movies or any other input. A popular type of Video Capture Card is a TV Tuner Card which is generally used to view and record movies or to watch TV on a computer. A Video Card should not be confused with Video Capture Card because a Video Card or Graphics Card is used to output or play video from the computer to your monitor while Video Capture Card is used to record or capture video from the input source. However, you will require a powerful processor and graphics card for the smooth functioning of the video capture card. The most common use of video capture cards is to capture video and audio for internet video streaming. It is also used to capture gameplay videos from consoles and videos from DVR. Here in this post, I am going to provide you the best video capture cards for professional video recording and other video capturing work.

Must Read:

Best Internal Video Capture Cards & TV Tuner Cards for PC

Here are the best internal video capture cards and TV tuner cards that you can use to record or capture videos in HD / 1080p on your PC. Internal Video Capture Cards or TV Tuner Cards offers better performance and features over a USB Video Capture Card.

Hauppauge Colossus 2 HD Video Capture Card

The first video capture card in our list is Hauppauge Colossus 2. Hauppauge is an American electronics company that is known for making high-quality video capture cards and TV tuner cards. Hauppauge Colossus 2 is an HD Internal Video Capture Card that allows you to record your TV programs from cable TV, DVR or satellite TV box, capture videos from DVR and record Xbox, Playstation or PC gameplay in HD. Hauppauge Colossus 2 lets you record videos from HDMI (non-HDCP encrypted HDMI) and Component Video at 1080p resolution at 30FPS and it also includes HDMI passthrough for watching videos at 1080p at 60 frames per second while recording at the same time.

The audio input for this HDMI capture card includes Left/ Right RCA audio input and Optical audio input. It also has an IR Blaster in/out port for controlling your cable or satellite set-top box from the card itself. The video capture card has built-in hardware support for H.264 Variable bit rate (VBR) and Constant bit rate (CBR) encoding, video downscaling, and a logo inserter for putting ‘bugs’ or logos on your recordings or video streams. It uses a high-quality Analog Devices video front end and a Magnum studio quality video encoder. The Magnum encoder supports data rates are from .2Mbits/second to 13.5 Mbits/sec CBR, with VBR datarates running to about 21 Mbits/sec. Below you can see the various input and output ports of this video capture card for PC.

This video capture card includes StreamEez to stream live videos on the internet. It also includes Personal Logo Inserter, so that you can add your own logo to your video recordings and Twitch and Ustream channels. The bundled software applications with this card include Hauppauge Capture for video recording, trim and streaming with Hauppauge’s StreamEez application and Hauppauge WinTV v8 application with support for the Hauppauge IR blaster. You may have to download the softwares from Hauppauge official website. This video recorder card works on both 32-bit and 64-bit versions of Windows. Overall a great feature-rich video capture card that is quite affordable too. Highly recommended by me.

Hauppauge Colossus 2 HD Video Capture Card Specifications
Video Recording supportTV Recording from cable or setup box, Gameplay from Xbox, Playstation or PC, DVR support
Input PortsHDMI in, Component Video in, Microphone, SP/DIF optical audio in, IR Receiver/Blaster in/out
Output PortsHDMI out, IR Receiver/Blaster in/out
InterfacePCI Express x1 or x16
FeaturesHD Recording (1080p) @ 30fps, Live Video Streaming on Twitch, YouTube or Upstream, HDMI Passthrough
Operating System supportMicrosoft Windows 10, 8, 7 or Vista (32 or 64-bit), or Windows XP Service Pack 3

Elgato Game Capture HD60 Pro

As the name suggests Elgato Game Capture HD60 Pro is a game capture card for recording games in high definition (HD) for streaming or for other use. This game capture card can record gameplay at 1080p resolution at 60 FPS. It comes with one HDMI in and one HDMI out (pass-through) port. This video capture card can record gameplay videos and stream them at the same time. It can record or capture unencrypted HDMI from Playstation 4, Xbox One & Xbox 360, Nintendo Switch & Wii U. This is a great game capture card for building a game streaming PC for Twitch and other game streaming platforms.

Elgato Game Capture HD60 Pro comes with an advanced H.264 encoder that enables you to record unlimited footage in 1080p60 quality at 60Mbps bit rate while keeping the file size and CPU load minimal. The card comes with built-in live streaming to Twitch, YouTube along with live commentary feature. It requires a PCIe x1/x4/x8/x16 slot and Windows 10 operating system for its working. So if you are looking for a high-quality game recording internal video capture card for your PC then you cannot get better than this one.

Elgato Game Capture HD60 Pro Specifications
Video Recording supportGameplay from PC, Playstation 4, Xbox One & Xbox 360, Nintendo Switch & Wii U
Input PortsHDMI in
Output PortsHDMI out
InterfacePCIe x1/x4/x8/x16
FeaturesHD 1080p Recording and playback at 60 fps
Operating System supportMicrosoft Windows 10

Hauppauge WinTV-quadHD TV Tuner Card

This is a great TV Tuner Card from Hauppauge for watching and recording TV shows on your PC. Hauppauge WinTV-quad HD TV Tuner Card is a feature-rich and high-quality TV Tuner card that comes with four ATSC and QAM tuners. This means you can watch and record up to 4 TV programs at the same time. This is a low profile TV Tuner card and it comes with Half-height and full-height brackets, IR Receiver cable and remote control. This internal TV Tuner card plugs in the PCIe x1 / x16 of your motherboard and it does not need any external power from the PSU.

This TV Tuner card comes with an F connector and WinTV v8 application or software which gives you TV-in-a-window or TV full screen, plus picture-in-picture. This is a powerful TV Tuner card and it lets you record TV in HD quality from the HD TV source. It supports Windows 7/8/10 OS and you need a good CPU and Graphics Card if you want a smooth live TV experience on your PC. So if you are looking for a top-quality and feature-rich internal TV Tuner Card with excellent recording capabilities then you must get this one.

Hauppauge WinTV-quadHD TV Tuner Card Specifications
Video Recording supportTV Recording ATSC / QAM
Input PortsF connector / Coaxial RF connector
Output PortsNA
InterfacePCI Express x1 / x16
FeaturesIR Blaster Cable, Remote Control, HD TV Recording
Operating System supportMicrosoft Windows 10, 8, 7 or Windows Vista with latest Service Pack

AVerMedia DarkCrystal HD Capture Pro

This is an affordable HDMI capture card that can capture from the HDMI input source at HD / 1080p resolution. AVerMedia DarkCrystal HD Capture Pro video capture card can capture videos from HDMI (un-encrypted) and from analog connections. There is no HDMI pass-through in this HDMI video capture device which is one of its disadvantages. But you may use an HDMI Splitter box to view HDMI content on your PC while recording simultaneously. The Input-Signal supported by this video capture card includes S-Video, Component (YPbPr, 1080i/720p), HDMI (1080i/720p), Analog Audio L/R site (RCA) and various resolutions supported are 480i / 480p / 576i/ 576p/ 720p / 1080i (50/60 Hz). This video capture device does not support capturing HD content with HDCP (High-Bandwidth Digital Content Protection).

The various features of this video capture card include real-time HD H.264 recording, support for both SD and HD video sources, color adjustment, 4:3/16:9 aspect ratio conversion, youtube video uploading, compatibility with adobe flash media live, watching blu-ray movies without a blu-ray drive. This video capture card requires a PCIe slot and it supports windows operating system. So if you are looking for a cheap video capture card with decent features and recording capabilities then you can buy this one for your PC.

AVerMedia DarkCrystal HD Capture Pro Specifications
Video Recording supportGameplay Recording, TV Recording, Analog Recording
Input PortsHDMI in, Composite/Component Dongle
Output PortsNA (No passthrough)
InterfacePCI Express x1
FeaturesHD Capture / Recording 1080p, Uncompressed Capture with 4:2:2 Color Resolution
Operating System supportWindows 10 / 8.1 / 7 / XP

Final Words

So if you are looking for good internal video capture cards or TV tuner cards then the above-mentioned capture / TV cards will not disappoint. They are all high-quality HD video capture cards and are compatible with the latest version of Windows. The main thing that you should keep in mind here is that you do require a good processor and dedicated graphics card if you want the best performance from them otherwise you will encounter lags and freezing when using video capture or TV tuner cards on your PC. If you have any queries or doubts regarding them, then feel free to ask me by leaving a comment below.