Posted  by 

Usb Compliance Hard Disk Controller Driver Download For Windows

Printable version
Usb compliance hard disk controller driver download for windows xp

* RECOMMENDED * Online ROM Flash Component for Windows - Smart Array 5i and SA-532

By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement.
Note: Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.

Type:Firmware - Storage Controller
Version:2.76(7 Jul 2008)
Operating System(s):
Microsoft Windows NT 4.0
Microsoft Windows Server 2003
Microsoft Windows Server 2003 for 64-bit Extended Systems
Microsoft Windows Server 2008 W32
Microsoft Windows Server 2008 x64
Microsoft Windows Storage Server 2003
Microsoft Windows Unified Data Storage Server 2003 x64 Edition
Microsoft Windows 2000
Multi-part download
File name:cp009289.exe (711 KB)
File name:cp009289.md5 (48 Bytes)
This Smart Component contains firmware for the HP Smart Array 5i and SA-532 Controllers.

Prerequisites:
ATTENTION!
The drivers below are required by this component. Download and install the applicable driver before updating the firmware on the controller.

OSMinimum Required Version
Windows 2000 5.46.2.32
Windows Server 2003 5.46.2.32

To locate a driver, do the following:

  1. Go to www.hp.com.
  2. Enter the version number in the Search field and click the 'Begin the search' button.
  3. Select the result which has the matching version number and OS of the target system.
  4. From the resulting download page, download the package.

This Smart Array firmware will recommend updates for some SCSI disk drive models after the Smart Array firmware has been installed. To avoid notification during the POST routine, update any applicable hard disk drives before updating the Smart Array firmware. Click here to obtain the list of affected disk drive models.

To ensure the integrity of your download, HPE recommends verifying your results with the following SHA-256 Checksum values:

f81dc01242be0c8643123d67a6f476a86ff26f60b08c4f287e5d34a5f00be857cp009289.md5
d86a8383ab25444ad1714733d4c6c4dd47e92651b0403668df27274f6089f56ecp009289.exe

Reboot Requirement:
Reboot is required after installation for updates to take effect and hardware stability to be maintained.

Installation:
Place the Smart Component in a temporary directory.

Double-click on the Smart Component.

Follow the directions given by the Smart Component.

Reboot your system if you would like the update to take effect immediately.

End User License Agreements:
Hewlett-Packard End User License Agreement

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Important:

HP recommends for remote deployment of this package that you obtain the most recent version of the Firmware Maintenance CD and follow these steps:

  • Place the Firmware Maintenance CD on a USB key using the USB Key Creator Utility.
  • Place the firmware to be updated in the directory, /compaq/swpackages on the USB key.
  • Run Autorun from _autorunautorun_win.exe on the Firmware Maintenance CD from the USB key on a system
  • Select the Firmware Update tab
  • Click on the Install Firmware link to launch the HP Smart Update Manager
  • Follow the GUI to install the firmware on remote servers

Notes:
To determine which component is applicable for your server or controller please refer to the link.

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

  • Implemented a stripe lock algorithm to avoid potential data write errors observed during rare instances of background surface analysis initialization and I/O writes occurring on Raid 1 or Raid 1+0 volumes. This has only been observed in a rigorous test environment and has not been reported in a production environment.

HP recommends for remote deployment of this package that you obtain the most recent version of the Firmware Maintenance CD and follow these steps:

  • Place the Firmware Maintenance CD on a USB key using the USB Key Creator Utility.
  • Place the firmware to be updated in the directory, /compaq/swpackages on the USB key.
  • Run Autorun from _autorunautorun_win.exe on the Firmware Maintenance CD from the USB key on a system
  • Select the Firmware Update tab
  • Click on the Install Firmware link to launch the HP Smart Update Manager
  • Follow the GUI to install the firmware on remote servers
Version:2.76 (7 Jul 2008)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

  • Implemented a stripe lock algorithm to avoid potential data write errors observed during rare instances of background surface analysis initialization and I/O writes occurring on Raid 1 or Raid 1+0 volumes. This has only been observed in a rigorous test environment and has not been reported in a production environment.

Version:2.74(A) (11 Jan 2008)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

  • Fixed an abnormal volume state issue where under certain rare conditions, a replacement drive that is in a rebuilding state in a RAID 1 or RAID 1+0 configuration may be marked 'OK', prior to completing the rebuilding process. Click here to view the Customer Advisory for this fix.
  • Fixed SCSI compliance issue on Microsoft Windows Server 2008.

This Smart Array firmware will recommend updates for some SCSI disk drive models after the Smart Array firmware has been installed. To avoid notification during the POST routine, update any applicable hard disk drives before updating Smart Array firmware. Click here to obtain the list of affected disk drive models.


Version:2.66(B) (23 Jan 2008)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Updated the component installer. If you have previously updated to version 2.66, another update is not needed.

  1. Fixed issue where the Smart Array 5i /532 controller prevents the operating system from saving a system memory dump file to disk when a user presses the non-maskable interrupt (NMI) dump button.

This Smart Array firmware will recommend updates for some SCSI disk drive models after the Smart Array firmware has been installed. To avoid notification during the POST routine, update any applicable hard disk drives before updating Smart Array firmware. Click here to obtain the list of affected disk drive models.


Version:2.66(A) (27 Jul 2006)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

1. Fixed issue where the Smart Array 5i /532 controller prevents the operating system from saving a system memory dump file to disk when a user presses the non-maskable interrupt (NMI) dump button.

This Smart Array firmware will recommend updates for some SCSI disk drive models after the Smart Array firmware has been installed. To avoid notification during the POST routine, update any applicable hard disk drives before updating Smart Array firmware. Click here to obtain the list of affected disk drive models.


Version:2.62(C) (23 Mar 2005)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

1. Fixed an issue that prevented a Windows Backup job from completing to an AIT-100 tape drive installed in an MSA500.

2. Fixed an issue in the Option ROM Configuration for Arrays (ORCA) where the RSO option was not displayed for the MSA500 controller.

3. Fixed an issue that could cause Windows Device Manager to fail and the system to stop responding when >4GB of memory is in use in the DL360 G2, DL360 G3, BL20p, BL20p G2 and BL40p.

4. Fixed an interrupt handling issue that can cause a server to reboot when using Microsoft Remote Installation Services (RIS).

Removed the F1 prompt from the POST routine when recommending disk drive firmware updates.


Version:2.58(A) (4 Feb 2004)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Fixed an issue where some ProLiant server models may become unresponsive after a drive hot-plug. Refer to Customer Advisory EX031212_CW01.

Fixed a problem that unnecessarily caused drives to downshift to slower speeds.

Fixed a cache reconfiguration issue.


Version:2.56(A) (6 Nov 2003)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Fixed an issue where an operating system might time out during a flash operation

Fixed a potential controller lockup if an active Smart Array Cluster Storage controller is removed

Improved capacity expansion operations

Added support for powering up a Smart Array Cluster Storage after powering up the server


Version:2.38(B) (25 Sep 2003)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Added support for the 4-Port Shared Storage Module.

Added a driver version check to the component installer. This component contains version 2.38 firmware.


Version:2.36 (14 Jan 2003)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Corrects the issue with the Smart Array 5i Plus present in versions 2.20 and 2.34 where Battery Backed Write Cache operations were not properly supported. This is also referenced in Customer Advisory EX021217_CW01.

Added support for Selective Storage Presentation (SSP) for the Smart Array Cluster Storage.


Version:1.92 (9 Oct 2002)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Corrected the rebuild priority when I/O is running.

Added support for the ProLiant Essentials Recovery Server Option Pack.


Version:1.80 (10 May 2002)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Improved error handling to detect missing drives.

Corrected an issue with negotiating the correct speed for tape devices running at asynchronous speeds.

Added support for the Battery-Backed Write Cache module (Smart Array 5i).

Improved performance for RAID 5 write operations.

Improved error handling if an attached storage enclosure is power-cycled during configuration.


Type:Firmware - Storage Controller
Version:2.76(7 Jul 2008)
Operating System(s):
Microsoft Windows 2000
Microsoft Windows NT 4.0
Microsoft Windows Server 2003
Microsoft Windows Server 2003 for 64-bit Extended Systems
Microsoft Windows Server 2008 W32
Microsoft Windows Server 2008 x64
Microsoft Windows Storage Server 2003
Microsoft Windows Unified Data Storage Server 2003 x64 Edition

Description

This Smart Component contains firmware for the HP Smart Array 5i and SA-532 Controllers.

Installation Instructions

Prerequisites:
ATTENTION!
The drivers below are required by this component. Download and install the applicable driver before updating the firmware on the controller.

OSMinimum Required Version
Windows 2000 5.46.2.32
Windows Server 2003 5.46.2.32

To locate a driver, do the following:

  1. Go to www.hp.com.
  2. Enter the version number in the Search field and click the 'Begin the search' button.
  3. Select the result which has the matching version number and OS of the target system.
  4. From the resulting download page, download the package.

This Smart Array firmware will recommend updates for some SCSI disk drive models after the Smart Array firmware has been installed. To avoid notification during the POST routine, update any applicable hard disk drives before updating the Smart Array firmware. Click here to obtain the list of affected disk drive models.

To ensure the integrity of your download, HPE recommends verifying your results with the following SHA-256 Checksum values:

f81dc01242be0c8643123d67a6f476a86ff26f60b08c4f287e5d34a5f00be857cp009289.md5
d86a8383ab25444ad1714733d4c6c4dd47e92651b0403668df27274f6089f56ecp009289.exe

Reboot Requirement:
Reboot is required after installation for updates to take effect and hardware stability to be maintained.

Installation:
Place the Smart Component in a temporary directory.

Double-click on the Smart Component.

Follow the directions given by the Smart Component.

Reboot your system if you would like the update to take effect immediately.

Release Notes

End User License Agreements:
Hewlett-Packard End User License Agreement

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Important:

HP recommends for remote deployment of this package that you obtain the most recent version of the Firmware Maintenance CD and follow these steps:

  • Place the Firmware Maintenance CD on a USB key using the USB Key Creator Utility.
  • Place the firmware to be updated in the directory, /compaq/swpackages on the USB key.
  • Run Autorun from _autorunautorun_win.exe on the Firmware Maintenance CD from the USB key on a system
  • Select the Firmware Update tab
  • Click on the Install Firmware link to launch the HP Smart Update Manager
  • Follow the GUI to install the firmware on remote servers

Notes:
To determine which component is applicable for your server or controller please refer to the link.

Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

  • Implemented a stripe lock algorithm to avoid potential data write errors observed during rare instances of background surface analysis initialization and I/O writes occurring on Raid 1 or Raid 1+0 volumes. This has only been observed in a rigorous test environment and has not been reported in a production environment.

Important

HP recommends for remote deployment of this package that you obtain the most recent version of the Firmware Maintenance CD and follow these steps:

  • Place the Firmware Maintenance CD on a USB key using the USB Key Creator Utility.
  • Place the firmware to be updated in the directory, /compaq/swpackages on the USB key.
  • Run Autorun from _autorunautorun_win.exe on the Firmware Maintenance CD from the USB key on a system
  • Select the Firmware Update tab
  • Click on the Install Firmware link to launch the HP Smart Update Manager
  • Follow the GUI to install the firmware on remote servers

Revision History

Version:2.76 (7 Jul 2008)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

  • Implemented a stripe lock algorithm to avoid potential data write errors observed during rare instances of background surface analysis initialization and I/O writes occurring on Raid 1 or Raid 1+0 volumes. This has only been observed in a rigorous test environment and has not been reported in a production environment.

Version:2.74(A) (11 Jan 2008)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

  • Fixed an abnormal volume state issue where under certain rare conditions, a replacement drive that is in a rebuilding state in a RAID 1 or RAID 1+0 configuration may be marked 'OK', prior to completing the rebuilding process. Click here to view the Customer Advisory for this fix.
  • Fixed SCSI compliance issue on Microsoft Windows Server 2008.

This Smart Array firmware will recommend updates for some SCSI disk drive models after the Smart Array firmware has been installed. To avoid notification during the POST routine, update any applicable hard disk drives before updating Smart Array firmware. Click here to obtain the list of affected disk drive models.


Version:2.66(B) (23 Jan 2008)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Updated the component installer. If you have previously updated to version 2.66, another update is not needed.

  1. Fixed issue where the Smart Array 5i /532 controller prevents the operating system from saving a system memory dump file to disk when a user presses the non-maskable interrupt (NMI) dump button.

This Smart Array firmware will recommend updates for some SCSI disk drive models after the Smart Array firmware has been installed. To avoid notification during the POST routine, update any applicable hard disk drives before updating Smart Array firmware. Click here to obtain the list of affected disk drive models.


Version:2.66(A) (27 Jul 2006)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

1. Fixed issue where the Smart Array 5i /532 controller prevents the operating system from saving a system memory dump file to disk when a user presses the non-maskable interrupt (NMI) dump button.

This Smart Array firmware will recommend updates for some SCSI disk drive models after the Smart Array firmware has been installed. To avoid notification during the POST routine, update any applicable hard disk drives before updating Smart Array firmware. Click here to obtain the list of affected disk drive models.


Version:2.62(C) (23 Mar 2005)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

1. Fixed an issue that prevented a Windows Backup job from completing to an AIT-100 tape drive installed in an MSA500.

2. Fixed an issue in the Option ROM Configuration for Arrays (ORCA) where the RSO option was not displayed for the MSA500 controller.

3. Fixed an issue that could cause Windows Device Manager to fail and the system to stop responding when >4GB of memory is in use in the DL360 G2, DL360 G3, BL20p, BL20p G2 and BL40p.

4. Fixed an interrupt handling issue that can cause a server to reboot when using Microsoft Remote Installation Services (RIS).

Removed the F1 prompt from the POST routine when recommending disk drive firmware updates.


Version:2.58(A) (4 Feb 2004)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Fixed an issue where some ProLiant server models may become unresponsive after a drive hot-plug. Refer to Customer Advisory EX031212_CW01.

Fixed a problem that unnecessarily caused drives to downshift to slower speeds.

Fixed a cache reconfiguration issue.


Version:2.56(A) (6 Nov 2003)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Fixed an issue where an operating system might time out during a flash operation

Fixed a potential controller lockup if an active Smart Array Cluster Storage controller is removed

Improved capacity expansion operations

Added support for powering up a Smart Array Cluster Storage after powering up the server


Version:2.38(B) (25 Sep 2003)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Added support for the 4-Port Shared Storage Module.

Added a driver version check to the component installer. This component contains version 2.38 firmware.


Version:2.36 (14 Jan 2003)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Corrects the issue with the Smart Array 5i Plus present in versions 2.20 and 2.34 where Battery Backed Write Cache operations were not properly supported. This is also referenced in Customer Advisory EX021217_CW01.

Added support for Selective Storage Presentation (SSP) for the Smart Array Cluster Storage.


Version:1.92 (9 Oct 2002)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Corrected the rebuild priority when I/O is running.

Added support for the ProLiant Essentials Recovery Server Option Pack.


Version:1.80 (10 May 2002)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Improved error handling to detect missing drives.

Corrected an issue with negotiating the correct speed for tape devices running at asynchronous speeds.

Added support for the Battery-Backed Write Cache module (Smart Array 5i).

Improved performance for RAID 5 write operations.

Improved error handling if an attached storage enclosure is power-cycled during configuration.


Usb Compliance Hard Disk Controller Driver Download For Windows

Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.

Usb Compliance Hard Disk Controller Driver Download For Windows

Drivers for lenovo s30 with windows 10 2016-09-09, 1:48 AM I've just updated my lenovo S30 to Windows 10 and I need 2 divers for it the 'PCI serial port' and the 'SAS controller' I've already done the windows updates and installed the chip set drivers. Fixed an issue where Windows Server x64 would hang or blue screen when the Smart Array driver is installed or upgraded on a system that has greater than 7GB RAM. Fixed Array behavior to prevent unwanted device migrations by detecting conditions, where a SCSI disk drive unexpectedly changes its SCSI ID.

Usb Compliance Hard Disk Controller Driver Download For Windows Xp

Windows-compatible PC equipped with USB port. Intel chipset is recommended. The device may not perform to its full specs when used with an added USB 2.0 interface card. This product cannot be used with a USB 3.0 port that is not compatible with USB 2.0 specification. Hard Disk Controller: USB Compliance: USB Mass Storage Device. Download driver acer aspire 1450, download driver acer aspire 1450 windows 7. Press the Windows key + R, type compmgmt.msc, and click Run to open Computer Management. Navigate to Disk Management. When prompted to, initialize your disk(s). If you are running Windows ® 7 or later and are using a drive larger than 2TB, initialize the disk(s) with GPT. If you are running an earlier version of Windows, initialize the disk(s.